| Online Catalog | Fast Entry | Order History | Get Quote | View Cart | Logout |
|
Connector Wiring Instructions |
|
|
|
|
|
Step 1. Slide grip sleeve over cable jacket. Cut and strip cable jacket, braided shield and dielectric to dimensions shown. Do not nick conductor.
|
|
|
Step 2. Wet exposed conductor using a non acid core 60 - 40 tin lead solder,
then slide contact on conductor and solder in place. Do not over heat cable
dielectric, as swelling may prevent
insertion of cable into shell. Flare braid as shown without fraying.
|
 |
|
Step 3. Slide cable assembly into shell as far as it will go. At this stage the shell
grip fingers should be under the flared braid as shown.
|
|
|
Step 4. Slide grip sleeve forward over braid and bottom out against shell;
crimp in place using Kings crimp tool number KTH-1000 and crimp die number
KTH-2062. |
 |
|
Go to Coaxial / SHV-5 Connector products listing
|
|
